Table of contents

Monday 13 January 2014

Flat mounting clip for Velleman K8200 3D printer


Here is just a quick follow up on my previous frame clip (http://ljwinkler.blogspot.ie/2014/01/frame-clip-and-locking-pin-for-velleman.html). The middle section fits snugly into the aluminium profile only if there is no flat cable or other wires running along, that’s why I have created another version of the clip, this time with flat middle piece:



And here is the result:


The rest of the clip remains the same. It contains exact same rectangular holes on both sides and the pin designed previously will work as well. However, a countersunk M3 or M4 bolt needs to be used:


To download the files - visit my profile on Thingiverse (http://www.thingiverse.com/ljwinkler/designs) or use direct links below:

 
Follow me on Twitter, Google+, Thingiverse, YouTube or by email to receive the latest updates.

If you like my blog - please use the donate button :)  This will help me making new stuff. THANK YOU!



Posted by at
Labels: , , , , , , , ,

5 comments:

  1. eu7 June 2014 at 23:18

    Very useful thing. I did the same, but simpler, without sections (only triangle shapes). By the way, don't you do to add a cooler to keep motherboard from overheating?

    ReplyDelete
  2. Unknown10 June 2014 at 20:30

    The highest temperature I have recorded was about 90C (on the X-Y controllers) - so way below the limit. And this is with increased current on the stepper motors. It gets up to this temperature after few minutes and then stays constant (doesn't matter if I print for 10 minutes or 10 hours).

    ReplyDelete
  3. Viv4 March 2018 at 15:53

    Hi sorry to bother you, but I need some help in getting my k8200 3D printer to work, At the moment, I have version 1.6.1 of Repetier Host, which doesn't seem to want to load k8200BOARDCOVER.stl, amongst other problems. Do you have any suggestions where I could go to get some help, please?

    ReplyDelete
    Replies
    1. Unknown5 March 2018 at 17:48

      Hi Viv,
      What error are you getting?
      The version you are using is quite old, not sure if the Slic3r is already configured in it. (Slic3r slices the object and translates it into the X-Y-Z movements).
      I'd suggest downloading the latest Repetier-Host (https://www.repetier.com/download-now/). Currently it is 2.0.5 for Windows/Linux and has the slicing function preconfigured.
      Please share more details if the issue persists.

      Cheers,
      LJ

      Delete
  4. Unknown12 June 2021 at 12:58

    Review : Best Skateboard Trucks
    Valve Adapters Adaptors
    Replace Pond pump Lamp
    all-Mount Garden Hose Reels
    Apple Magic Mouse
    Dr. Dre Tour In-Ear Headphones
    Best Lawn Mower Large
    Fixing Your trimmer
    Troy-Bilt Gas Pressure Washer
    Tempered Glass Screen Protector

    ReplyDelete

Subscribe to: Post Comments (Atom)